Place of Origin: | Guangdong, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
Superior Corrosion Resistant Glass Fused Steel Tank Used As Anaerobic Reactor
Introduction of glass fused steel tank
Glass fused steel tank is superior in corrosion resistant as it is actually the combination of “ glass ” and “ steel “ . So it has the advantages of both : superior corrosion resistant of glass , and strength and flexibility of glass . This is the combination of both to achieve the best . Glass fused steel tank is the best tank to be used as anaerobic reactor, especially when the media inside than tank could be highly corrosive. To name a few , glass fused is used as many kinds of anaerobic reactor , such as CSTR, USR, UASB, EGSB, MBR , ect.
We are the leader manufacturer of glass fused steel tank in China established in 1989 . Until to now, we have built glass fused steel tanks in many countries including the United States and Australia and specially in Asia .
Glass fused steel tank specifications
Coating color |
dark blue, dark green , white, and customized |
A standard steel plate size |
effective size 2400mm x 1200 m |
Steel plates thickness |
3mm - 12mm , depends on the diameter & height |
Coating thickness |
0.25mm - 0.4mm, two coating internal and external |
Acid and alkalinity proof |
standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
Adhesion |
3,450N/cm |
Elastic |
same as steel sheet , around 500KN/mm |
Hardness |
6.0 Mohs |
Service life |
>30 years |
Spark test |
>1500 V |
Permeability |
gas and liquid impermeable |
Easy yo clean |
smooth, glossy, inert, anti-adhesion |
Corrosion resistance |
excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds |
Glass fused steel tank advantages
1. superior performance in corrosion resistance and against rust : glass fused steel tank is combination of glass and steel . Glass is coated to steel and become a protection layer to the tank body
2. factory fabrication tank . No painting or spray on erection site . The process of glass coating is finished in factory, so there is no spray works to be done on job site . Glass fused steel tank is a kind of factory pre-fabricated tank
3. minimal maintenance cost : once it is erected, there is minimal maintenance requirement needed.
5. No need crane or other large equipment during erection. Since glass fused steel tank is bolted type tank . So no need for crane to hang the tanks and located it. Workers just assemble steel plates and bolted them piece by piece
6.&n
Center Enamel Co.,Ltd [China (Mainland)]
Business Type:Manufacturer
City: Guangzhou
Province/State: Guangdong
Country/Region: China (Mainland)